KENT Panic Alarm System is an electronic device designed to assist in alerting in emergency situations where a threat to life or property can exist. This alarm can be used to request for emergency assistance from local security. Alarm can be set via an audible siren and a visual display indication.
The Rs232 to RS485 converts the RS 232 Serial Port Signals to RS 485 signals for long distance driving, and for interfacing devices supporting RS 485 or ports. Rs232 to RS485 is available as an External Standalone Unit enclosed in a plastic casing, which takes power from the supplied Power Adaptor. It is equipped with powerful and reliable Isolation to Data signals and Protection to Serial Port from any high voltage (1500 VA) appearing in RS 485 side.
No |
Descriptions |
Remarks |
| 1 | Make | KENT ITS |
| 2 | Model | KENT/RS485_CONV/V1.0 |
| 3 | Interface | RS232, Rs485 |
| 4 | Maximum cable length | 1220m |
| 5 | Signal isolation | optical isolation to serial port signals |
| 6 | Mode of operation | Half duplex |
| 7 | Number of drivers/receivers | 32 |
| 8 | Baud rate | 300 to 115200 baud |
| 9 | Led Indication | Power, TxD, RxD |
| 10 | Power Supply | DC 5V, 300MA |
| 11 | Operating temperature | -20 to 60° degree Celsius |
| 12 | Dimensions (H x W x D) mm | 90x80x50mm |
| 13 | Reliability and maintainability |
MTBF: 30,000 hours MTTR: 0.15 hour |
under construction
No |
Descriptions |
Remarks |
| 1 | Make | KENT ITS |
| 2 | Model | KENT/SCU/V1.0 |
| 3 | Microcontroller/Processor | 32-bit ARM Cortex M4 Series Processor |
| 4 | RFID Operating Frequency | 840 to 960Mhz |
| 5 | Label Protocol | EPC C1 Gen2 / ISO 18000-6C |
| 6 | Reading Range | Configurable (Up to 5 meters) |
| 7 | Communication/Control Interface | WIFI/Ethernet/GPRS/RS485/RS232 |
| 8 | Design Criteria |
Architecture: · 32 Bit ARM Cortex Architecture I/O Ports: · Opto-isolated Inputs Terminals · Solid State Relay Output Terminals Protection level: · Circuit breaker · Fuse Protection for over current · Metal oxide for over voltage surge protection · Short Circuit Protection |
| 9 | Visual Indications (Led Indications) |
Red LED Slot Occupied Green LED Slot Empty Yellow LED Vehicle gone out for maintenance activity Blue LED Pending Slot |
| 10 | Audible Indication | Electronic Buzzer |
| 11 | Power supply | 230 ± 10%, 50 Hz |
| 12 | Power consumption | 25 Watts max |
| 13 | Operating temperature | -20 to 55 degree Celsius |
| 14 | Weight | 1Kg or less |
| 15 | Ingress Protection | Ip54 |
| 16 | Physical Dimensions (H x W x D) mm | 100x150x150 |
| 17 | Reliability and maintainability |
MTBF: 30,000 hours MTTR: 0.30 hour |
RFID KENT Ultrasonic Meter is a handheld, detects high frequency sound produced by operating equipments, leaks and translates these signals to audible range so that user can hear these sounds through a headset and see the intensity on visual indication led bar. Ultrasonic meter device quickly and easily locates the leak location, which covers a wide range of leaks; pressure or vacuum or any gas.
12/3B, Siddharth Tower, Office No. 1003, 10th Floor, Kothrud, Pune-411 029, (MS), India.
+91 9604699000
info@kent-india.com